Dyras HCLR-1220 User Manual download pdf (Page 7)

HCLR-1220

QUALITY CERTIFICATION

It is hereby certified that the battery operated hair clipper type dyras HCLR-1220 conforms to the technical

specification described below:

Type: HCLR-1220

Description: Battery operated hair clipper

Rated voltage for battery operation: DC 1.2 V from single incorporated battery cell

Noise emission: L

= 67 dB

Rated voltage for battery charging: AC 230 V ~ 50 Hz 2 W

Class of protection: Class II

Manufacturer: The dyras wwe.factory, Inc. U.S.A.

We are continuously developing our products to keep them up-to-date, which means the technical data of our appliances may change without

any prior notice. Errors and omissions excepted.

All rights - including distribution by film, radio or television, translation, photographic or audio copying, abstract

reprint and other duplication - are specifically reserved. Any breach may result in legal action.

THE SYMBOL CE

This appliance meets the requirements for safety and electromagnetic compatibility (EMC). The relevant ‘CE’ mark

can be found on the nameplate, on the packing box and in the instruction manual.

Beard trimming guide

• To trim beards, set the three-way switch of the device to its lower (clipping) position.

• Set the required clipping length at the comb attachment, as described above. Beards are recommended to be

trimmed longer at first in smaller amounts, to allow for corrections.

• When beard clipping has been completed, remove the comb attachment and set the three-way switch of the

device into its upper (adjustment) position. With this setting you can improve the beard contour.

MAINTENANCE AND CLEANING

Warning! Before cleaning and maintenance, the device must be switched off. Do not clean or carry

out maintenance whilst the device is charging. Always unplug the power cable first from the wall

socket then from the device.

• In order to avoid an electric shock, never immerse the appliance, the cord or the plug in water or any other

liquid.

• Never remove the cover of the appliance.

• After use, pull down comb attachment from the appliance and, using the small brush, clean hairs carefully

from between the upper and lower blades.

• Clean the outside cover of the appliance with a damp, soft, lint-free cloth and then wipe the cleaned

surfaces with a dry lint-free cloth. Take care not to allow any moisture inside the cover. Let the appliance dry

completely before re-using or storing it.

• When cleaning the appliance, never use solvent (acetone, benzole, petrol, alcohol, etc.) as these may solve

the casing material, or the internal parts of the appliance if they get into. Do not use cleaning agents with

coarse or grinding effect.

• In order to preserve hair cutting performance and to maintain the long life of your appliance, it is important

to regularly oil the hair cutting unit.

• If over a period of time, despite regular cleaning and oiling, the cutting power decreases, the hair cutting

unit can be replaced. However, the hair cutting unit is subject to wear and tear, for which no manufacturer’s

guarantee exists.

• After cleaning, wait until the device and all of its accessories have completely dried out, then store in a dry,

dust and frost free area.

User'sManual for HCLR-1220.indd 12-13User'sManual for HCLR-1220.indd 12-13 2011.03.10. 14:27:522011.03.10. 14:27:52

1 2 3 4 5 6 7 8 9 10 11 12 ... 30 31

Comments to this Manuals

No comments

Dyras HCLR-1220 User Manual Page 7

Comments to this Manuals